Monitor studio - Neumann KH80 DSP A G EU

1.999,00 RON(TVA inclus)

Cantitate

In stoc

Plata în rate de la
333.17 RON / lună.
( Vezi detalii )

Etichete: Monitor studio - Neumann KH80 DSP A G EU, monitoare studio, monitor studio

Beneficii

transport 25 RON
* in anumite localitati se poate percepe o taxa suplimentara per KM exteriori
garantie 24 luni
retur in 14 zile
informatii suplimentare

Descriere

Ultra-compact, DSP-controlled bi-amplified near-field monitor with exceptional power reserves

New DSP engine optimizes output to achieve reference class sound
Neumann.Control App for iPads® to setup, align and operate the monitor
Mathematically optimized dispersion to deliver excellent detail in any surroundings

Free field frequency response ±6 dB	53 Hz … 21 kHz
Free field frequency response ±3 dB	57 Hz … 21 kHz
Free field frequency linearity deviation between 100 Hz and 10 kHz	± 0.7 dB
Reproduction accuracy between 100 Hz and 10 kHz: 100%, 80%, 50% of loudspeakers produced	±0.26; ±0.23; ±0.17 dB
Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu)	<20 dB(A) SPL
Sine wave output with a THD < 0.5 % at 1 m in half space	90 dB SPL (>200 Hz)
Max. SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz)	108.8 dB SPL
Max. SPL in full space at 3% THD at 1m (averaged between 100 Hz and 6 kHz)	102.8 dB SPL
Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz)	92.1 dB SPL
Max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions	104 dB(C) SPL
Max. short term SPL with music material at 2.3 m in typical listening conditions (pair / full range)	93 dB(C) SPL
Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer)	100 dB(C) SPL
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range)	88 / 93 dB(C) SPL
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair with subwoofer)	91 / 96 dB(C) SPL
Analog input(s)	XLR / 6.3 mm (¼”) Jack: analog electronically balanced
Analog input impedance	14k Ohms
Max. input level	+24 dBu for 94 dB SPL setting; +18 dBu for 100 dB SPL setting; +10 dBu for 108 dB SPL setting; +4 dBu for 114 dB SPL setting
Common mode rejection ratio (CMRR)	>56 dB @ 15 kHz
Volume control	via Neumann.Control software
Volume control range; resolution	0 … -∞ dB; 0.1 dB
Input gain control (sensitivity)	0 dB ... -15 dB
Output level control (output level in 1 m based on 0 dBu input level)	94; 100; 108; 114 dB SPL
Digital converter: resolution; design	24-bit DAC; Δ∑
Digital converter: sampling rate	48 kHz
Digital internal sampling rate	48 kHz
Dynamic range A-D	114 dB(A)
Dynamic range A-D-A	111 dB(A) woofer; 112 dB(A) tweeter
Dynamic range D-A	114 dB(A) woofer; 117 dB(A) tweeter
Latency	2 ms (A-D-A linear phase)
Delay: User adjustable delay range	0 … 70 ms
Delay: Resolution: time; distance	0.1 ms; 3.44 cm (1 3/8”)
Delay: Max. frames Audio-video synchronisation (lip sync)	1.75 (40 ms frames); 2.1 (33 ms frames)
Delay: Time-of-flight maximum distance	24 m (79 ft)
Controller design	Digital; active
Crossover frequency	1.8 kHz
Crossover slope	48 dB/oct; 8th order with phase correction
Equalization: Low-Mid	0; -1.5; -3; -4.5 dB
Equalization: via Neumann.Control software	8 x full parametric IIR + low / high shelf global balance
FIR phase correction	Linear phase (170 Hz ... 16 kHz; +/- 45°)
Protection circuitry	Independent soft clip, peak and thermo limiters for woofer and tweeter; Woofer excursion limiter; thermo limiter for the electronics and amplifiers
Infrasonic filter: frequency; slope	61 Hz; 12 dB/Okt.
Remote control	Neumann.Control software via an RJ45 connector carrying standard IP data
Display: On; Normal Operation	Neumann logo “White”
Display: Identification	Neumann logo “Rosé”
Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute	Neumann logo “Red”
Display Brightness	via Neumann.Control
Output power woofer amplifier (THD+N with limiter deactivated: 10%)	120 W
Output power tweeter amplifier (THD+N with limiter deactivated: 10%)	70 W
Output power woofer amplifier (THD+N with limiter deactivated: 0.1%)	90 W
Output power tweeter amplifier (THD+N with limiter deactivated: 0.1%)	50 W
Mains Power Supply: input voltage; frequency	100-240 V; 50/60 Hz
Power consumption (230 V / 100 V): Standby	<330 / <50 mW
Power consumption (230 V / 100 V): Idle	9 / 8 W
Power consumption (230 V / 100 V): Full output	180 W
In-rush current (Peak)	20 A
Standby	Disabled; 90 mins (default); user defined in software
Cabinet material	Composite polycarbonate
Cabinet surface finish; color (front / back)	Painted; metallic anthracite (RAL 7021) / Black (RAL 9005)
Operating conditions	+10° C to +40° C (+50° F to +104° F); <75% RH; non-condensing
Transport/storage conditions	-25° C to +60° C (-13° F to 158° F); <90% RH; non-condensing
Woofer	100 mm (4") with protecting black metal grille
Tweeter	25 mm (1") with protecting black metal grille
Mounting points	2 x M6 threaded inserts with 70 mm spacing on back panel; thread depth 15 mm (5/8”)
Product dimensions (height x width x depth)	233 x 154 x 194 mm (9 1/8" x 6" x 7 5/8")
External net volume	6.7 liters
Product weight	3.5 kg (7 lbs 8 oz)
Packed dimensions (height x width x depth), mm (inches)	345 x 277 x 243 mm (13 5/8" x 10 7/8" x 9 5/8")
Packed weight	4.1 kg (9 lbs 1 oz)
Packed cube	0.023 m³